2017-09-21

Fine silver vessel

This small vessel was raised from a 150mm disc of 0.6mm thick fine silver sheet. I arranged for alternate bands to be hammer faceted, and filed and polished. It only awaits hallmarking then shipping! The total weight is only 104gm, but the rim thickness is now 0.92mm.

While raising the pot I managed to split it near the base, so I sawed the conical base off and discarded the small cone. I then soldered a flat disc of 0.7mm fine silver to the open base of the pot, and was well pleased with the results. I chose 0.7mm thickness for the new base because I found that I had increased the wall thickness there by the action of raising.

Fine silver cup

And this is it after hallmarking.

Fine silver cup

No comments: